Imperial Probes "Probe 1" For DazStudio 4.8+
Designed for G3F
Figure Library Features:
- Probe 1: This is a large probe with two easypose tool hoses and a camera/seeing eye. There are several lights/lens that can be repositioned.
The dildo ports/receptacles can be repositioned and the connector segments under the probe can be posed/repositioned. There are also three antennas that can be repositioned. Most of the elements of this figure have morphs built in for size/shape.
The dildo and camera/eye hoses have easypose bending technology built in. The "Acam" "Bdildo" and "Cdildo" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. There are two arm receptacle/ports that can be used to pose the "Accessory 5" claw figure into if you have the expansion pack. This figure is symmetrical mirroring for the right and left hand side parts.
A pose file is included in the Apply Cap preset that will hide all the lower parts of this figure including the tool/camera hoses. The Apply Cap preset adds the "under cap" figure to the probe to make it more compact. The tool heads have length/shape morphs. You can use the length morph to hide the tool and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
- Probe 1 "under cap": This is a covering that fits under the probe. It has a posable trap door that opens and closes.
A pose file is included to position the cap and pose file to hide the underbelly parts of the probe.
- Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose bending. There are
smart prop cuffs in the props library for V4, M4, G3F and G3M that can be used in conjunction with this probe.
Starter pose files are provided for V4 and G3F with load pose presets including the cuffs and the probe in the poses library.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Library:
Smart prop ankle and wrist cuffs are provided for V4, M4, G3F and G3M. These cuffs are styled for use with the Imperial Probe packages. These smart props will automatically position and parent to your characters.
-----------------------------------------------------------------------------------------------------------------------------------
Poses Libraries:
Note: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
-----------------------------------------------------------------------------------------------------------------------------------
Readme File: A more detailed readme file is included in the product zip file.
https://www.renderotica.com/store/sku/57938_Imperial-Probes-Probe-1-For-DazStudio-4-8-
File Hosting: Mega.nz
