G2 to G8 pose converter?

[Niala]

There are many G3 to G8 pose converters, some can convert a pose on the fly, others do batch conversion, and they work very well. But I am not aware of any of g2 to g8 (or even to g3) converter.
The only one that I saw is a freebie that can *transfer* poses, but you need to have a g2f and g8f char present in the scene to perform the transfer, which works but is very inconvenient.

Some time applying a g2f pose to a g8f (with the g3f corrections) can give good enough results, but it always requires tweaking, and some time the results can be terrible.

Do any of you know a decent g2 to g8 or g3 pose converter?

[Abad]

This? 🙂 https://sharecg.com/v/89846/view/8/Script/Daz3d-Pose-Converter-Standalone

[Niala]

Thanks. Did not know this converter.
It is a python program that can batch convert a complete directory and the source is included. Very well coded. And the result is seems pretty good (at least for the few tests that I did).
Thanks again @abad

[Abad]

yes... Is a good script in Python. (I dont remenber is a 2.7 or 3.x) I've always wondered why Daz insists on QT ..

[Boorian]

Please, someone have this script from https://sharecg.com/v/89846/view/8/Script/Daz3d-Pose-Converter-Standalone (site unfortunally is down)

[3Demon]

I recommend the 'Bone Minion' packages by RiverSoft. If you are unaware, it introduces a 'bone' skeleton to the scene for whichever figure you're using and instantly converts (provided you have the appropriate package(s); V4/M4/G1/2/3/8/9) the poses and applies them to the figure. The converted poses are very accurate. There are even batch conversion scripts available. Including G2.

[Boorian]

Okay, very thank you for reply!
Yes, I tried this script, but I couldn't interact with it correctly, I probably did something wrong... So I have to try to figure it out again.
But Daz3d-Pose-Converter-Standalone is so usefull script, it literally converting 100 poses in just seconds, whereas now you have to do everything manually 🙁

I had that script, but my hard drive crashed with everything valuable.

[3dnoob]

Maybe try this then convert g3 pose to g8
https://www.daz3d.com/genesis-2-to-genesis-3-pose-converter

🙂

[Keab]

Please, take a look at this post, you'll find that script along with a lot of extra stuff rescued from sharecg:

https://zonegfx.com/forums/topic/morpfixer-freebie-help/#post-2145295

Best regards,

[Boorian]

Thank you sooo much, there's definitely a lot of useful stuff here!

[3Demon]

Also, I noticed that there are free Pose Converters scripts (possibly the one mentioned above) available in the free section at Renderosity. Unsure if they too are linked to now-defunct ShareCG.

[3dnoob]

I found this one
https://www.renderosity.com/freestuff/items/93662/genesis-1289-pose-converter-for-genesis-3

🙂

[Author]

Posts