Morph transfer V4 to GF8.1 (NSFW)

[Anonymous]

@eelgoo

I could never get the G3 to G8 one to work.

Is there a trick to it?

No need for that app.

Use GenX for V4 to G3 and don't change any of the settings. Then XTransfer to G8. All the dials will work on G8.1 🙂

One thing I will mention. My copy of DS is almost clean meaning there's hardly any content in the library apart from Genesis head and body morphs plus a few poses and some lighting. This is to omit any chance of the transfers going wrong.

[Anonymous]

@Billyhill Great render! How did your feet transfer? You can see in mine that they are a little distorted and none of the options fixed them. If you don't mind, would it be too much trouble to share the morph? I've wanted GND for G8 for ages and your transfer look far superior to mine!
As for wrap, I saw a tutorial on youtube, got lost in the first 5 minutes and just gave up. I tried my hands at Blender with Goz and I got completely lost on the interface.
I've been doing some tutorials lately with a toony house, so fingers crossed I'll be able to use it, I really want to.

[Anonymous]

@trader

Thanks. Took me all of 2 minutes :p
Her feet were fine, I have no idea why your feet look distorted. Like I said in my previous post, i left all tabs on GenX untouched and it went smooth. Sure I'll share the GND4-G8. Gimme a little while to test the morph then I'll send you the link 🙂

Don't give up. I nearly did but I'm a persistant so and so and found it easy after some trial and error. Try Zbrush if you can, you won't regret it.

[eelgoo]

@Billyhill Gotta say she does look great.

IMO better than the original actually.

TBH I found that with a few transfers to G3F.
It has been a long time since I have done it, but IIRC It is a two step process to G3F.
V4-V6-G3F?

That would make it 3 steps to G8F

:0/

[Anonymous]

@eelgoo

It was GenX V4 to G3, then XTransfer G3 to G8 so yes 3 in total V4-G3-G8. The entire process took under 5 minutes. I'll PM you and trader the morphs.

You need GND4 and XTransfer installed and you should be good to go. Just follow the data package to the XTRANSFER folder. Drop them in and restart DS. All morphs are individual - Head - body - etc.

[Anonymous]

@trader

No feet problems 🙂
Have you checked to see if any other morphs are dialed in?

[mxyzptlk]

@billyhill

I'd love to get my hands on that morph, too. The conversion looks great 😊

[Anonymous]

@mxyzptlk.

Check your PM. You're Beta tester No:3 😉

[Anonymous]

For those who don't know the story behind the GND series.

The vendor dated a dancer who left him and he was heartbroken hence the name Blackhearted. I read that on the Ros website as soon as the original GND hit the marketplace. It's a shame G8 wasn't around at the time, I'm sure he could have done a good job with a newer version 🙂

[Anonymous]

First of all, so great to have all these morphs. I just made a full one, no extras.
I loaded it up, no messed up feet!!! I noticed that the breath and butt thicken morphs explode her.
I compared it to mine and noticed that the head looks different, especially the eyebrow area and that there are no defined nipples.
But that's small nitpicks, I'll definitely keep yours to use in my renders. It's a perfect transfer!!!

[Anonymous]

I actually love the face in your conversion! I never cared for the slightly mean face and I wanted to cut it off. Here's a comparison. I've had this GND4 installed for ages. I might have made changes to her, can't really remember.

[mxyzptlk]

I really like the face in that conversion. I wanted to test my ScarJo morph with it.
The morphs work great. As mentioned earlier, the breathe and butt thicken do explode...but only when taken beyond 1, so it is understandable.

[Anonymous]

Thanks guys. Have fun!
Yes the damn limits. 100% is always best and the preggo morph look like an alien is on the way.

And for my next trick. Koko V4 to Genesis 8.1

After conversion her eyes were bulging from the sides so i sent her to Zbrush and did a quick fix, also pinned her ears back a little. The final render was a quick 2 minute job just to show you what she looks like on G8.1 🙂

After fixing the eyes I wanted to widen the eyelids but this led to problems, the lashes were distorted in DS so I left it for another time.

[mxyzptlk]

Nice

[Anonymous]

I really really need to learn how to use Zbrush! Your renders look fantastic and it's a V4 in a G3 shirt for G8 🙂

[Author]

Posts