Sub-Z: CORE PACK
Ultra High Tech or Alien? This complete laboratory could be human or Alien, you decide! Lab Chamber, Tool Hub and Restraints!
CHAMBER FOLDER CONTENTS--
----------------
- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.
- Cable 1: This is a set of thick, hanging cables. This is a figure with repositionable cables for adjustment. Place this figure anywhere in your scene for added interest.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Cable 2: This is a single cable with transparent outter shell and lighted, bulbous interior filament that glows. Place this figure anywhere in your scene for added interest.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Chamber: This chamber can either serve as a human high tech or alien experimentation chamber for dubios types of observation or experimentation. The chamber has 2 sets of walls, *wall1* walls are smooth walled and have no opening, by default these walls are not shown, they sit just below the chamber room, out of view. The *wall2* walls have an egg-shaped pod that can be used for displaying various speciments of creatures or people. There are 6 of each wall, 2 left, 2 right, front and back. You can move the walls out of view for better viewing angles.
There is a central lamp in the ceiling that can be moved in and out of view in the event you want to add the Hub figure. There are also right and left side columns with small lights build into them, these columns can be moved out of view or rotated around the center of the chamber.
PLEASE NOTE: Because of the non-typical shape of the room, some viewing angles might be obstructed, especially trying to view the recessed floor. The "base" body part of the chamber has some MORPHS that will drop the right, left, front or back sides of the base floor, floor light ring and recessed floor simultaneously. Select the "base" body part of the Chamber to access these morphs.
Lighting on the Chamber is emmissive lit, so it will glow in a dimly lit scene.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Chamber Tunnel: This is an add-on tunnel that fits in the openings on the outter wall of the chamber. The tunnel curves so you can't see the end of the tunnel. This is a simple add-on item to add interest to your scene. You can hide the sides, ceiling or floor of the tunnel in the event you want to render a scene with something in the tunnel.
There are 2 pre-parented sets of chamber and tunnel combos in the assemblies folder for convenience.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Chamber Vent Fan: This is a large fan unit you can import into the scene, it sits on the edge of the chamber. The 'body' portion of the fan vent rotates around the center of the chamber, select the 'body' part if you want to rotate it. This unit is simply for added interest if you want to use it. You might have to move some of the columns out of the way to use the fan.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Control Panels 1 and 2: These are hovering control panels you can add to the scene for added interest. The screens are emmissive lit to glow in a dimly lit scene. Add and place as desired.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Tank 1: This is a display or observation Tank that hangs from the center of the chamber ceiling. You may need to move the chambers central lamp out of the way in the event of collision. The tanks fluid level is morph adjustable. Pose files for G8F/G9F included in the pose library.
There is an add-on Base for the Tank if you don't want it in the center of the room, see below.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Tank 1 Base: There is a stand alone tank base and a smart version. The smart version will automatically position and parent to the tank.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
---------
CHAMBER PRESETS SUBFOLDER--
---------
There are 2 pre-assembled versions of the chamber:
- Chamber All Tunnels: This version has chamber tunnels attached to each wall section.
- Chamber Half Tunnels: This version has tunnels only on the front and back wall sections.
A material options subfolder is in this library for changing the texture themes on both the chamber and the tunnels, select the chamber then apply the theme.
--------------------------------------------------------------------------------------------------------------------
--------
HUB FOLDER CONTENTS--
--------
- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.
- Hub: The hub is a ceiling mounted (by default) orbital tool and restraint holder. The hub has an articulated armature with a tool or restraint holder tool tip armature. One of the armature joints has a cable bundle that can be rotated to proper angle to simulate gravity. The main hub connector also has a cable bundle that can be angle adjusted. There is a repositionable lamp head with easypose bending stem. The lamp moves independantly of the hub and armature, this allows you to precision position the lamp and then pose the easypose stem back toward the repositionable lamp receptacle on the hub connection. There are amblient lit lighting elements on the hub which will glow in a dimly lit scene. The hub by default fits in the Chamber figures central well on the ceiling. If you use the hub, move the chambers lamp up out of the way to avoid collision.
There is a Hub Assemblies subfolder with pre-assembled Hub and Restraint or Tool assemblies. The last armature (arm6FT) on the arm has some length and width morphs to fit different tools and restraints. If you manually add any restraints or tools, this is the body part to add them to. There is an Xtra Arm armature in the folder if you want to have 2 armatures. See below.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Xtra Arm: This is an extra armature, same as the arm on the hub. You can add this arm to the hub or any other place you wish. There is an Xtra Arm Assemblies subfolder with pre-assembled Xtra Arm plus tool or restraints.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Xtra Lamp. This is an extra lamp, same as the one on the Hub figure. The lamp head has an easypose bending stem. The lamp moves independantly of the hub and armature, this allows you to precision position the lamp and then pose the easypose stem back toward the repositionable lamp receptacle on the hub connection.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Hub Restraint 1: This is an exam table with repositionable wrist and ankle cuffs. There is also 4 repositionable spires. The restraint also features right and left breast milking teets (hidden within the table by default) with easypose hoses that can be posed back into the teet receptacles near the head.
Pose file is provided for the restraint and matching pose for G8F/G9F. Parent G8F/G9F to the restraints "table" body part before applying poses. There is a pose to show and hide the teets.
A pre-assembled restraint table already positioned and parented to the hub and Xtra Arm is available in their subfolders.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Hub Restraint 2: This is a fully adjustable combined thigh and wrist cuffing system. The cuffs are mounted to a central connection in the back of the restraint. The "base" body part of the restraint is what is used to move the entire restraint around.
Pose file is provided for the restraint and matching pose for G8F/G9F.
A pre-assembled restraint table already positioned and parented to the hub and Xtra Arm is available in their subfolders.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Hub Tool 1: This is a large dildo shaped tool that can be mounted to the hub. The dildo has size and shape morphs. A pre-assemble Hub and Xtra Arm assembly is provided in the subfolders in the Hub folder.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Hub Tool 2: This is a multi-tool with drill bit, syringe, dual laser head and buzz saw style blade. The drill, laser, syringe and saw blade have morphs so check them out.
The "Tool Pose Options" folder has some pre-set tool options for quick application. The poses will not change the tools housing position.
A pre-assemble Hub and Xtra Arm assembly is provided in the subfolders in the Hub folder.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Hub Tool 3: This is a dildo holder with 3 different shaft shaped dildos, each with some size and shape morphs. At the bottom of the dildo base is a cable bundle. You can adjust the angle of each tool's holder as needed.
The "Tool Pose Options" folder has some pre-set tool options for quick application. The poses will not change the tools housing position.
A pre-assemble Hub and Xtra Arm assembly is provided in the subfolders in the Hub folder.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
--------
STATION X SUBFOLDER
--------
- Read First: These informational icons have instructions for the items in the library, please click on and read them for some directions.
- Station X: This unique restraint or exam table is crafted to have a super hi tech or alien look and feel. By default the Station X is floor mounted, however you can place the 'base' body part where you wish, maybe ceiling or wall, and move the 'stemconn' body part to a new angle and position, then pose the easypose stem back toward the base.
The table is fully articulated and poseable and has right and left side symmetrical mirroring for fine tuning adjustments. Most parts have size and shape adjustments for fine tuning poses and custom posing. There are 2 leg and 2 arm armatures to restraint your characters arms and legs. The cuff rims have size and shape morphs to snug them up if needed. The table has a fuck machine with 2 dildo heads. The dildo heads have size and shape morphs. There is an easypose hose on the fuck machine that allows you to pose the hose back toward a receptacle on the front of the table stem. The table stem has another receptacle on the back side for posing your characters helmet (if used) toward the receptacle. See notes on helmets below.
2 Pose files for G8F/G9F and matching pose file for the table and helmet are provided.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Helmet: This is a simple face covering helmet with and easypose hose attached to the top. The base of the hose is repositionable. seg_000 of the hose can control the hoses overall length. The seg_001 and every tenth or 20th segment (seg_010, seg_020, etc) have master bending nodes.
You can position and parent the helmet to any characters head, parent it to the head after fitting.
Material Pose files are included for 3 different texture themes (Material poses in Material Theme or options folder)
- Helmet G8F/G9F/G8M/G9M Smart: These are smart parenting helmets for G8F/G9F/G8M/G9M. Select your character in the scene then apply the helmet, it will automatically position and parent.
71323,renderotica,davo
https://www.renderotica.com/store/sku/71323_Sub-Z-CORE-PACK
File Hosting: mega.nz
(Generated from Filled Request)
